Twin Link Gateway

Wireless transmits signals from point-to-point.  Accepts 2 inputs from a range popular signal types and outputs 2x 4-20mA.


Transmit signals up to 2.5 miles*

When it’s just too far or too expensive to lay cable for signal communications, turn to Define Instruments Twin Link units. Twin Link uses wireless technology to communicate to and control devices over distances of up to 2.5 miles with Line Of Sight (*requires 12db aerial).

Reach can be extended beyond this distance with the addition of a repeater unit. Repeater units can also be used to transmit around RF obstacles when line of sight is obscured.

Out-of-the-box ready for 4-20mA I/O applications

The pre-paired Point to Point units come “out of the box ready” for 4-20mA I/O applications but additionally can accept a huge variety of input types including mA, RTD and Frequency.Twin Link boasts 2 analog inputs plus 4 digital I/O switches. Channels are fully isolated and units are industrial strength.

Transmits through walls

The Twin Link will transmit through stud walls, brick and concrete, so if you need to get signals a few rooms away or up a floor or two, Twin Link can handle it. In interior applications range is 300-500ft through typical buildings and building materials.

Easy 60 second set up

Twin Link connects to a PC via USB – cutting configuration time to a mere 60 seconds.

Saves money

As Twin Link can be used to both transmit and control, it reduces costs by removing the need for separate units.

License Free Frequency bands

Twin Link runs at 2.4Ghz license free and FCC approved for US. Power output 20dBm / 100mW.

Devices or Software
SetupUse Define ToolBox for P2P Configuration Setting up your wireless Point-to-Point system is fast and easy with Define ToolBox. Simply connect the Twin Link Input Node (P2P-I) to your PC via USB (Bridge Key required), and you'll be up and running in no time.
Technical
Inputs2x Isolated Universal Inputs; 4x digital inputs, 2x digital outputs, and 2x relays; Transmit up to 1.5km (0.9mi) Line Of Sight; Thermocouple, RTD, mA, V, mV, potentiometer, digital pulse and AC current sensors; Flexible IO enables a range of setpoint functions

Write a review

Note: HTML is not translated!
    Bad           Good

Welcome To AmationSource.com - Downloads will be available soon.

CLICK HERE FOR DOWNLOADS

If Pop-Up doesn't open acess Downloads from Main menu; Datasheets on the Flyout Menu

Twin Link Gateway

Free Shipping

This product qualifies for free shipping.

  • $517.00

Available Options

Tags: Point-to-point Transmitter, Edge Processing, analog, digital I/O, 4–20mA, RTD, TC

Zen IoT GatewayEdge Processing DeviceConnect you..
$1,180.00

Required to program the following: any Zen, Javelin, Twin Link, Sentry, Merlin, Pathfinder or TM Ser..
$49.00

Converts USB to RS232/485/422, or RS232 to RS485/422.It can be powered via USB port or external po..
$204.00

Z Zen DataloggerData Logging Control StationKey features:16 Universal isolated inputsTC, RTD, mA, mV..
$1,384.00

Advanced controller for monitoring and batching applicationsClick Here: DataSheet ASCPI-200..
$401.00

The AmationSource.com Wireless Water Rope Sensor detects conductive liquids anywhere along th..
$129.00

The AmationSource.com wireless Duct Temperature Sensor uses an NTC thermistor with 8 ft. lead ..
$79.00

Accepts digital pulse inputs from flow sensors and meters. Dual display shows the flow rate and volu..
$376.00

The USB gateway allows your AmationSource Wireless Sensors to communicate with the online wireless s..
$49.00

TM-2DLI 2-Wire Isolated Transmitter, Universal Input, 4-..
$142.00